Start with the liner, not the underwear
MoliForm Extra Soft Incontinence Underwear Liners are designed to sit inside underwear and provide a layer that helps keep skin dry and control odor. The liner is not a standalone brief, so the fit of your underwear and the way you position the liner matter as much as the liner itself.
This guide walks through a practical placement routine, a simple fit check, and the signs that it is time to change the liner. It uses only what the product record confirms, so you can make a confident decision without guessing.
A simple placement routine
These steps assume you are using the liner inside regular underwear. Adjust only if your clinician or caregiver has given you different instructions.
- Check the liner before use: Unfold the liner and confirm the wetness indicator is visible. The indicator is a supplied feature that helps you see when the liner has been used.
- Center the liner in the underwear: Place the liner lengthwise in the crotch area so it runs from front to back. The liner is a liner, not a full brief, so centering it helps it stay in place during movement.
- Smooth the edges: Press the liner gently against the fabric so it lies flat. Wrinkles or folded edges can create channels where moisture may travel.
- Put on the underwear as usual: Pull the underwear up and adjust the liner if it shifts. A quick check in a mirror or by feel can confirm the liner is still centered.
Fit checks that catch most problems
A liner that fits well should feel secure without bunching. Use these checkpoints after you put it on and again after you have been active for a while.
- The liner stays centered: If the liner slides to one side, your underwear may be too loose. Try a closer-fitting pair or reposition the liner before activity.
- No sharp folds or edges: Run your fingers along the liner edges. Any folded edge can let moisture escape, so smooth it out or replace the liner if it will not lie flat.
- The wetness indicator is easy to see: The indicator should be visible when you check. If it is hidden by clothing or folded fabric, adjust the liner so you can monitor it without removing the underwear.
- Comfort during movement: The liner should not dig in or feel bulky. If it does, check that it is not doubled over or placed too far forward or back.
What the MoliForm liner record confirms
- Hartmann-Conco MoliForm Extra Soft Incontinence Underwear Liners (PHT168919): Pad Type: Liner This confirms the product is a liner meant to be worn inside underwear, not a standalone absorbent brief.

Hartmann-Conco MoliForm Extra Soft Incontinence Underwear Liners (PHT168919) - Hartmann-Conco MoliForm Extra Soft Incontinence Underwear Liners (PHT168919): Wetness Indicator: Yes A wetness indicator helps you decide when to change the liner without guessing.
- Hartmann-Conco MoliForm Extra Soft Incontinence Underwear Liners (PHT168919): Outer Material Inco: Clothlike A clothlike outer material is relevant to how the liner feels against skin and how it sits in underwear.
- Hartmann-Conco MoliForm Extra Soft Incontinence Underwear Liners (PHT168919): MoliForm Extra Soft Incontinence Underwear Liners feature a three-part core with treated curly fibers that offers ideal skin dryness and helps control odor. This describes the liner's intended role: supporting skin dryness and odor control during use.
- Hartmann-Conco MoliForm Extra Soft Incontinence Underwear Liners (PHT168919): Width Inches: 17 The listed width helps you compare the liner's coverage with the underwear you plan to use.
When to change the liner
The wetness indicator is your most direct cue. Check it at regular intervals and change the liner when the indicator shows use. If you are unsure, change the liner rather than waiting, especially if you feel dampness or notice odor.
There is no supplied schedule for how often to change the liner. The right interval depends on your body, your activities, and how much fluid you drink. Use the indicator and your own comfort as guides, and ask a clinician or caregiver for advice specific to your situation.
Skin care and odor control in daily use
The liner is designed to help with skin dryness and odor, but it works best as part of a consistent routine.
- Change promptly when soiled: Leaving a used liner in place works against the dryness the liner is meant to support. Change it as soon as you notice use.
- Keep the skin clean and dry: Clean and dry the skin before putting on a fresh liner. This is general hygiene advice, not a manufacturer instruction.
- Watch for discomfort: If you notice persistent irritation, redness, or discomfort, stop using the liner and speak with a healthcare professional. The supplied information does not cover skin reactions.
What the supplied information does not settle
The product record does not include a sizing chart, a maximum wear time, or instructions for disposing of the liner. It also does not confirm compatibility with specific underwear styles or absorbency levels. For those details, check the product packaging or ask the manufacturer or a healthcare professional.
Use this guide as a practical starting point for placement and fit checks, and rely on the wetness indicator and your own comfort for change timing. If your needs change, reassess the liner choice with your care team.


